As a homeowner, you should ensure that everything in your home is perfect ranging from plumbing to electrical. Maintaining a perfect home is usually costly especially if you rely on experts for everything. There will be no need to hire experts to help if you understand some of the heating tips and DIY ideas. If your kitchen faucet is damaged, you should not worry about finding professionals to help as you can replace it yourself. If your kitchen faucet starts to leak, you should consider replacing it to avoid huge water bills. There is no need to wait for a plumber if you can resolve the issue. Some of the vital parts that you should know include spout, aerator, and handle and read more here on heating tips. The article herein is a DIY guide on how to replace kitchen faucet with the help of other heating tips.
The need for certain tools and pieces of equipment should not stop you from replacing the kitchen faucet yourself. The first step is diving the process into two parts; removing the old faucet and installing the new one. To remove the old faucet, you should start by closing the valves. Below the sink, you will find knobs that you should turn to close the valves. As soon as you close the valves, you should turn on the faucet to get rid of the existing pressure. The faucet should be on in the replacement process.
Using an adjustable wrench, you should proceed and unscrew the nuts that connect the water lines. Once the nuts get lose, you should start delinking the faucet from the holes. At this point, you will need a basin wrench to remove the nuts completely. In this case, you will need an extra pair of hands to hold the faucet from about the sink. Once the nuts come up, you should remove the faucet.
In the replacement part, you should assemble the new faucet. A manufacturer’s manual will take you through the process. Be keen in the assembling process to avoid damaging the new faucet before using it. Once the faucet is ready for installation, you should cover all the holes using trimming rims and deck plates. Once you cover all the holes, you should insert the supply tubes and connect them to the right places. After that, tighten the nuts using a basin wrench.
The last step is linking the holes to the water lines. Connections that are likely to leak should be wrapped with a Teflon tape. If you intend to use the hot-and-cold faucet, you should be keen on the lines and have some heating tips. Therefore, if your kitchen faucet is damaged, you should not worry about finding a plumber to do it and you can learn other heating tips here.